How Small is Too Small?

I was so pleased with how well the rare earth magnets worked with the flight stands for 1/285 scale aircraft that I wanted to take a look at smaller applications.  Could they be made to work with 1/2400 scale aircraft?

Well…  Um…  Ah…  In a word, no.

The problem isn’t with the magnets really.  I found some 2mm x 1mm magnets which aren’t too obtrusive even considering the diminutive size of 1/2400 scale aircraft.  The problem is the stands themselves.  I couldn’t find a reliable combination of base and post that works with the magnets and provides acceptable stability without looking too chunky drawing attention away from the models.  The search will continue.

  In the meantime I have decided to mount some of my 1/2400 scale aircraft on more traditional stands.

  I used sheet styrene and my Dupli-cutter, from North West Short Line (NWSL), to make a handful of roughly 1/4″ strips.

An excellent tool for repetitive cutting of sheet styrene or balsa to make uniform strips.

An excellent tool for repetitive cutting of sheet styrene or balsa to make uniform strips.

  Once that task was complete I used my Chopper, also from NWSL, to cut the strips into roughly 1/4″ x 1/4″ squares.  Obviously, I could have skipped some of this work if I had strip styrene of the appropriate size on hand.  I didn’t have anything acceptable on hand on my desired time line so I did it the old-fashioned way.

Another great product from NWSL.  The Chopper makes short work of chopping strips to a uniform size.

Another great product from NWSL. The Chopper makes short work of chopping strips to a uniform size.

  After cutting the rough bases I drilled a hole in the center of each one for the steel pin which would become the stand.

Bases before and after drilling center hole for flight stand.

Bases before and after drilling center hole for flight stand.

  To prevent the model from teeter-tottering on the game table I counter-sunk the hole on the underside of the base that would conceal the pinhead.

Underside of base features countersunk center hole which will accept pinhead to prevent teeter-tottering.

Underside of base features countersunk center hole which will accept pinhead to prevent teeter-tottering.

  Before gluing the pins to their bases I cut them down to scale lengths appropriate for hovering helicopters, aircraft flying Nap Of the Earth (NOE), aircraft flying low level bombing runs, and maritime patrol aircraft.  With the current bases size pins longer than 2 inches would probably be unstable.  At scale that is about 400 ft, a reasonable representation of routine operating altitudes for ASW aircraft.

Some of the steel pins cut down to size.  Those on the right are for hovering helicopters while those on the left are for NOE aircraft.

Some of the steel pins cut down to size. Those on the right are for hovering helicopters while those on the left are for NOE aircraft.

Here is the flight stand base and pin ready for gluing.

Here is the flight stand base and pin ready for gluing.

Glue applied to pin.

Glue applied to pin.

Pinhead fits into recess presenting a flat and stable surface for the flight stand.

Pinhead fits into recess presenting a flat and stable surface for the flight stand.

These are completed flight stands, except for painting of course.

These are completed flight stands, except for painting of course.

Prototypes are complete. Aircraft are mounted.  In this case GHQ F-111 standing in for SU-24 and two MiG-29s.  Caution, these are really small. I accidentally drilled all the way through the second MiG-29.

Prototypes are complete. Aircraft are mounted. In this case GHQ F-111 standing in for SU-24 and two MiG-29s. Caution, these are really small. I accidentally drilled all the way through the second MiG-29.

 

Making these flight stands was pretty fun and I’m looking forward to making more.  After I get these stands painted it will also be much easier to photoshop them out of pictures with my fleet.  I hope you enjoyed the mini tutorial.

3 responses to “How Small is Too Small?

  1. A very good idea Paul… I’m curious on mounting the aircraft to the pins… how did you drill the holes in those tiny aircraft? I want to do the same for my 1/2400 IJN and USN Carrier Planes but I’m not sure I can actually drill a hole in them. They are SO small.

    Thanks for sharing,
    Tanner

    • Tanner,

      First, let me say I love your decals. They’ll be featured in my next installment.

      Second, I drill very carefully. I use a pin vise and one of my smallest drill bits. I end up doing it more by feel than by sight. As I’ve shown it doesn’t always work out just right. The main thing is to be patient and let the tool do the work. I drilled through that one because I was rushing it and pushing too hard. I’m going to do some of my WWII aircraft as well, probably the torpedo bombers to start.

      Paul

      • Great, thanks for the reply Paul. I’ve tried using small brass rod for my stands and I’ve tried drilling the matching holes in the 1/2400 aircraft and I haven’t been very good at it. I’m glad to hear its generally successful for you and I’ll give it another shot. Your recessed pin solution is much more elegant than mine 🙂

        Thanks for the kind words on the decals. I put a lot of work and effort into them and I’m glad to see that they’ve been a success with gamers/collectors!

        Tanner

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s